How to Install PVC Strip Curtains: A Move-by-Action Guidebook
How to Install PVC Strip Curtains: A Move-by-Action Guidebook
Blog Article
Here is a phase-by-phase information on how to set up PVC strip curtains:
Elements You will need:
PVC strip curtains
Mounting hardware (generally integrated Using the curtains)
Tape evaluate
Pencil or marker
Drill
Screws
Action 1: Measure the doorway
Use a tape evaluate to find out the height and width of your doorway the place you wish to install the PVC strip curtains. Make sure to evaluate the width in the doorway at the top, Center, and bottom, and utilize the widest measurement.
Phase 2: Reduce the PVC strips to duration
Using the measurements from move 1, cut the PVC strips to the suitable length. When you've got many strips to cut, think about using a straight edge as well as a utility knife to hurry up the process.
Action 3: Attach the mounting components
Using a drill and screws, attach the mounting components to the top of your doorway. Ensure the components is level and safe.
Step 4: Dangle the PVC strips
Start at one particular facet in the doorway and cling the PVC strips in the mounting components. Make sure the strips are evenly spaced and dangle straight. If vital, modify the strips by sliding them alongside the mounting components.
Step 5: Trim the strips
If any on the strips are too extended, utilize a set of scissors or perhaps a utility knife to trim them to the suitable size.
Move 6: Finish the installation
After the entire PVC strips are hung and trimmed, make certain They can be thoroughly aligned and adjust them as necessary. pvc strip curtain manufacturers You might also would like to add a excess weight bar to the bottom on the curtains to help keep them from swinging during the breeze.
Which is it! You now have PVC strip curtains mounted inside your doorway. Report this page